| Structure Development in the Laser Drawing Process of Poly(ethlene terephthalate) Fiber Analyzed by Milliseconds‘ Time-resolution WAXD/SAXS Measurements |
| 關鍵詞： |
WAXD/SAXS Laser Drawing Process |
| 類 別： |
新產業 >> 信息材料/技術 |
| 來 源： |
2005年新型纖維與聚合物材料國際學術會議（2005.10.19-21 上海） |
| 資料類型： |
pdf文件 |
| 資料大?。?/td>
| 324K |
| 簡 介： |
Fiber structure development in the poly (ethlene terephehalate ) fiber drawing process was investigated by wide-angle and small-angle x-ray scattering （WAXD / SAXS）on-line measurement. For the purpose, both high luminance x-ray source and carbon dioxide laser-heated-drawing system were applied. By the change of transmission x-ray intensity, the position of neck-like deformation was confirmed. Because the fluctuation of the position was less than 1.2 mm, the obtained diffraction images had a time-resolution of several milliseconds [1]. By increasing the fiber running speed, we have succeeded to get 0.7 milliseconds’ time-resolution. The crystal diffraction appeared in the WAXD images at about 20 ms after neck-like deformation, whereas the four-point SAXS pattern appeared immediately after neck-like deformation. With the increase of elapsed time after neck-like deformation, the meridional four-point scattering pattern changed into the two-point shape. |
| 上傳人： |
|
| 上傳時間： |
2007-07-23 17:47:03 |
| 下載次數： |
26 |
| 消耗積分： |
2 |
| 我要收藏： |
 |
| |
友情提示：下載后對該資源進行評論，即可獎勵2分。 |
|
本欄目部分資源來自互聯網，僅為促進數據共享和信息交流，如有版權問題請告知本網或上傳者本人，本網會及時給予答復。 |
| 報告錯誤
1.下載無效
2. 資料明顯無價值
3. 資料重復存在
|
